Dart Controls
Dart MD3P-P Digital DC Drive, Washdown rated Panel Mount, Input 120/240 VAC, Output 90/180 VDC, Current 10ADC, HP Range 1/8-1 (90V) 1/4-2 (180V) -with Plug-style terminal strip.
- Mfg's Part Number:
- MD3P-P
- Availability:
- Stock item, usually ships in 1-3 days
Description
The Dart MD10/MD3 Series Digital DC Drives are compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes Darts Micro-Drive the ultimate value in accuracy and control. Friendly front-panel field programming permits customizing the MD for specific applications. The MD can be set to display the target speed directly in RPM, FPM, GPM, process time, or any other engineering unit. Programmable parameters include maximum and minimum set speed, decimal points, operating mode (master or follower), and the constant which takes into account motor gear ratios. The Micro-Drive is simple to operate: set the desired RPM, rate, or time in the large 1/2? LED display by depressing the Up and Down push buttons on the front panel. Settings can be one digit at a time or fast sweep. The Micro-Drive settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary. Industry standard cutout dimensions of 1/8 DIN and 1/4 DIN provide easy panel installation. All wiring connects directly to a rugged screw type terminal strip through the rear panel. The flexibility of Darts Micro-Drive design makes it uniquely suited for many commercial and industrial applications. The Dart Model PU-40E / PU-40R is recommended for use with these models where pickup is turning 2500 RPM or less.
- Panel Mount
- Dual Supply Voltage 120/240 VAC, 50/60Hz
- Full HP rated - no auxiliary heat sink required
- 85-250 VAC line voltage operating range
- Closed loop +- 0.1% regulation
- Encoder required - See Dart PU Series
- Barrier terminal strip - optional plug terminal strip
- Full wave bridge supply
- Configurable Minimum & Maximum speed
- Configurable Linear Accel & Decel (ASP only)
- Programmable display units
- Non-volatile meory retains custom programming
- Program lockout safety feature
- Custom user program memory storage & retrieval
- See ambient temp in catalog
- 100:1 speed range
- Overload capacity: 200% for one minute
- Transient voltage protection
- Configurable alarms with Form C relay output
- Inhibit circuit - permits low power start & stop
- Suitable for washdown applications.
Downloads
Related Products
Dart Controls
Dart MD10P-P Digital DC Drive, Washdown rated Panel mount, Input 120/240 VAC, Output 90/180 VDC, Current 5ADC, HP Range 1/8-1/2 (90V), 1/4-1 (180V) with Opt P (Plug-style terminal strip)
Dart Controls
Dart MD10P Digital DC Drive, Washdown rated Panel Mount, Input 120/240 VAC, Output 90/180 VDC, Current 5ADC, HP Range 1/8-1/2 (90V), 1/4-1 (180V)
Dart Controls
Dart MD40P Plus Digital DC Drive, Washdown rated Panel Mount, Input 120/240 VAC, Output 90/180 VDC, Current 5ADC, HP Range 1/8-1/2 (90V), 1/4-1 (180V)
Dart Controls
Dart MD40P-420 Plus Digital DC Drive, Washdown rated Panel Mount, Input 120/240 VAC, Output 90/180 VDC, Current 5ADC, HP Range 1/8-1/2 (90V), 1/4-1 (180V) -with Opt 420 (isolated 4-20mA input and output).
Dart Controls